AN ANALYSIS OF THE FACTORS AFFECTING DEINDUSTRIALIZATION IN FOUR COUNTRIES

Authors

  • Muhammad Rizki Taufik Faculty of Economics and Business, Udayana University Author
  • I Nyoman Wahyu Widiana Faculty of Economics and Business, Udayana University Author

Keywords:

Deindustrialization, GDP per capita, Exchange Rate, Trade Openness

Abstract

The phenomenon of premature deindustrialization is increasingly prevalent in developing countries, where the manufacturing sector experiences a decline in its contribution to GDP before reaching the stage of industrial maturity. Indonesia, India, Colombia, and South Africa are examples of countries that have shown this tendency in recent decades. This study aims to analyze the simultaneous and partial effects of Gross Domestic Product (GDP) per capita, exchange rate, and trade openness on deindustrialization in these four countries during the period 1995–2023. This research utilizes secondary data obtained from the World Bank and applies panel data regression analysis. The Chow and Hausman tests indicate that the most appropriate model to use is the Fixed Effect Model (FEM). The results reveal that, simultaneously, the three independent variables have a significant effect on the contribution of the manufacturing sector. Partially, GDP per capita and exchange rate have a negative and significant effect, while trade openness has a positive and significant effect on the contribution of the manufacturing sector. These findings highlight the need for adaptive industrial development policies, particularly in maintaining exchange rate stability and promoting open trade that can enhance the competitiveness of the manufacturing sector in these four countries.

Downloads

Download data is not yet available.

References

Adisasmita, R. (2013). Teori-teori Pembangunan Ekonomi. Graha Ilmu.

Ajija, S. R. (2011). Cara Cerdas Menguasai EViews. Salemba Empat.

Akamatsu, K. (1962). A historical pattern of economic growth in developing countries. The Developing Economies, 1, 3–25.

Akinrinade, S., & Ogen, O. (2008). Globalization and de-industrialization: South-South neoliberalism and the collapse of the Nigerian textile industry. The Global South, 2(2), 159–170.

Aldersen, A. S. (1997). Globalization and Deindustrialization: Direct lnvestment and the Decline of Manufacturing Employment in 17 OECD Nations. Journal of World-Systems Research, 3, 1–34. https://doi.org/10.5195/jwsr.1997.119

Amalia, F. (2023). Fenomena Kutukan Sumber Daya Alam Dan Determinan Pertumbuhan Ekonomi Dalam Perspektif Pengelolaan Sumber Daya Alam. Univeritas Lampung.

Amin, S. (1976). Unequal Development: An Essay on the Social Formations of Peripheral Capitalism. Monthly Review Press; First Pr. Thus edition.

Amirapu, A., & Subramanian, A. (2015). Manufacturing or services? An indian illustration of a development dilemma. Center for Global Development and Peterson Institute.

Andriyani, V. E., & Irawan, T. (2018). Identification of Premature Deindustrialization and Its Acceleration in Indonesia (Period 1986-2015). Jurnal Ekonomi Dan Kebijakan Pembangunan, 7(1), 78–101.

Anggar, S. N., & Syahruddin. (2019). Deindustrialization Among Asean Countries And Related Affecting Factors. Russian Journal of Agricultural and Socio-Economic Sciences, 8(19), 177–186. https://doi.org/10.18551/rjoas.2019-08.19

Anggriawan, A., & Maimunah, E. (2025). The Dynamics of Industrialization in Middle-Income Countries:A Case Study of the Manufacturing Industry Sector. Indonesian Journal of Economics, Management, and Accounting, 2(3), 1581–1591.

Astuti, I. P., & Ayuningtyas, F. J. (2018). Pengaruh Ekspor dan Impor terhadap Pertumbuhan Ekonomi di Indonesia. Jurnal Ekonomi & Studi Pembangunan, 19(1), 1–10. https://doi.org/10.18196/jesp.19.1.3836

Baltagi, B. H. (2005). Econometric Analysis of Panel Data (3rd Editio). John Wiley & Sons Ltd.

Bell, D. (1974). The Coming of Post-Industrial Society: A Venture in Social Forecasting. Heinemann.

Bogliaccini, J. A. (2013). Trade liberalization, deindustrialization, and inequality: Evidence from middle-income Latin American countries. Latin American Research Review, 48(2), 79–105.

Bowen, H. P., Hollander, A., & Viaene, J.-M. (1998). Applied International Trade Analysis. University of Michigan Press.

Brooks, C. (2008). Introductory Econometrics for Finance (2nd ed.). Cambridge University Press.

Budiharsono, S. (1996). Transformasi Struktural dan Pertumbuhan Ekonomi Antar Daerah di Indonesia, 1969-1987. Program Pascasarjana Institut Pertanian Bogor.

Busse, M., Dary, S. K., & Wüstenfeld, J. (2024). Trade Liberalisation and Manufacturing Employment in Developing Countries. Structural Change and Economic Dynamics, 70, 410–421. https://doi.org/https://doi.org/10.1016/j.strueco.2024.05.003

Cairncross, A. (1982). What is deindustrialisation? In F. Blackaby (Ed.), Deindustrialisation (pp. 5–17). Pergamon.

Castillo, M., & Martins Neto, A. (2016). Premature deindustrialization in Latin America. Production Development, 205(4), 493–511. https://www.cepal.org/en/publications/40241-premature-deindustrialization-latin-america

Cengiz, O., & Manga, M. (2024). Does economic globalization trigger de-industrialization in Western Balkan countries? Empirical evidence based on augmented mean group estimator. Regional Science Policy and Practice, 16(4). https://doi.org/10.1111/rsp3.12709

Chaudhuri, S. (2015). Premature deindustrialization in India and re-thinking the role of government (FMSH Working Paper No. 91).

Chenery, H. B. (1960). Patterns of Industrial Growth.” The American Eco- nomic Review. 50(4), 624–654.

Corden, W. M., & Neary, J. P. (1982). Booming Sector and De-industrialisation in a Small Open Economy. Economic Journal, 92, 825–848.

Dasgupta, S., & Singh, A. (2006). Manufacturing, services and premature deindustrialization in developing countries: A Kaldorian analysis (2006/49; UNU-WIDER Research Paper).

Deardoff, A. V. (1998). Benefits and Cost of Following Comparative Advantage. (Research Seminar in International Economics Discussion Paper No. 423.).

Deraniyagala, S., & Fine, B. (2001). New trade theory versus old trade policy: a continuing enigma. Cambridge Journal of Economics, 25(6), 809–825.

Disman, & Ayu. (2017). Liquidity Risk: Comparison Between Islamic and Conventional Banking. 20.

Drakopoulos, S. A., & Theodossiou, I. (1991). A Kaldorian Approach to Greek Economic Growth. Applied Economics, 23(10), 1683–1689.

Easton, B. (1998). The Deindustrialization of New Zealand. Labour Employment and Work in New Zealand: 1998 Proceedings of a Conference, 38–46.

Edwards, S. (1998). Openness, Productivity and Growth: What Do We Really Know? The Economic Journal, 108(447), 383–398.

Faisal, A. (2001). Dasar-Dasar Manajemen keuangan (Edisi Pert).

Falck, H. (1992). Foreign Aid and Dutch Disease, The Case of Tanzania. University of Lund.

Ginting, S. C. (2004). Analisis Pengaruh Investasi Asing langsung dan Utang Luar Negeri Pemerintah Terhadap Pertumbuhan Ekonomi Indonesia Universitas Sumatera Utara. Universitas Sumatera Utara.

Grebenkin, I., & Botkin, I. (2016). The Impact of Imports on the Dynamics of the Regional Manufacturing Industry Development. Economy of Regions, 1(3), 703–713.

Gujarati, D. (2003). Ekonomi Dasar. Erlangga.

Gwynne, R. N. (1986). The Deindustrialization of Chile 1974–1984. Bulletin of Latin American Research, 5(1), 1–23.

Hamdy, H. (2012). Manajemen Keuangan Internasional. Mitra Wacana Media.

Hellberg, H., & Mannerson, L. (2019). Import penetration from China and its effect on manufacturing employment in the OECD countries. Lund University School of Economics and Management.

Hunt, S. D., & Morgan, R. M. (1995). The Comparative Advantage Theory of Competition. Journal of Marketing, 59(2).

Imantria, B. (2025). Determinants of Premature Deindustrialization and Uneven Manufacturing Industry in Indonesia. Jurnal Penelitian Ekonomi Dan Bisnis, 10(1), 30–42. https://doi.org/https://doi.org/10.33633/jpeb.v10i1.11581

Khobai, H., & Moyo, C. (2021). Trade openness and industry performance in SADC countries: is the manufacturing sector different?. International Economics and Economic Policy, 18, 105–126.

Kojima, K. (2000). The ‘Flying Geese’ model of Asian economic development: origin, theoretical extensions, and regional policy implications. Journal of Asian Economics, 11, 375–401.

Krugman, P. R., Obstfeld, M., & Melitz, M. J. (2018). International Economics: Theory and Policy (11th Globa).

Krugman, P. (1994). The Fall and Rise of Development Economics. Brookings Institution (Washington, D.C.); Lincoln Institute of Land Policy (Cambridge, Mass.).

Kutu, A., & Ngalawa, H. (2016). Dynamics Of Industrial Production In BRICS Countries. International Journal of Economics and Finance Studies, 8(1).

Lever, W. F. (1991). Deindustrialisation and the Reality of the post-industrial city. Urban Studies, 28, 983–999. https://doi.org/doi:https://doi.org/10.1080%2F00420989120081161

Lewis, M. (1954). Economic development with unlimited supplies of labour. The Manchester School of Economic and Social Studies, 22, 139–191.

Lincolin, A. (2020). Ekonomi Pembangunan (2nd ed). Universitas Terbuka.

Madura, J. (2008). International Financial Management (Ninth). Thomson South-Western.

Mankiw, N. G. (2000). Makroekonomi (Edisi ke 6). Erlangga.

Mansur, A. (2008). Is Indonesia Undergoing a process of De-industrialization? Institute of Social Studies.

McCombie, J. S. L., & de Ridder, J. . (1983). Increasing Returns, Productivity, and Output Growth: The Case of the United States. Journal of Post Keynesian Economics, 5(3), 373–387.

Mechergui, R., & Mouelhi, R. (2023). Deindustrialization and Trade Openness: The Tunisian Case (1643; ERF Working Paper Series).

Metinara, S., Priyarsono, D. S., & Irawan, T. (2011). Faktor-Faktor Yang Mempengaruhi Deindustrialisasi Di Indonesia Tahun 2000-2009. Institut Pertanian Bogor.

Mlambo, C. (2020). Exchange rate and manufacturing sector performance in SACU states. Cogent Business and Management, 7(1).

Nampewo, D., Munyambonera, E., & Lwanga, M. M. (2013). Sectoral Effects of Monetary Policy in Uganda. Journal of Statistical and Econometric Methods, 2(4), 17–40.

Neoh, S. F., & Lian, T. S. (2021). The Impact Of Trade Openness On Manufacturing Sector Performance: Evidence From Malaysia. Journal of Economics and Sustainability, 3(1), 12–22.

Notoatmodjo, S. (2018). Metodologi Penelitian Kesehatan. Rineka Cipta.

Oktaviani, R. (2017). Analisis Determinan Deindustrialisasi Di Pulau Jawa Tahun 2006-2015. UIN Syarif Hidayatullah.

Pasaribu, C., Sirojuzilam, & Syafii, M. (2024). Analisis Faktor-Faktor yang Mempengaruhi Deindustrialisasi di Indonesia. Ekonomis: Journal of Economics and Business, 8(2), 1712–1720.

Pieper, U. (1999). Deindustrialization and the Social and Economic Sustainability Nexus in Developing: Cross-Country Evidence on Productivity and Employment (Working Paper No.10).

Pinheiro, R. Q., & Abreu, A. J. G. De. (2025). China And Deindustrialization In Latin America (0367; REM Working Paper 0367-2025).

Porter, G. &. (2009). Basic Econometrics (5th Editio). The Mc-Graw-Hill Companies.

Prastity, N., & Cahyadin, M. (2015). Pengaruh Foreign Direct Investment dan Trade Openness Terhadap Pertumbuhan Ekonomi di Negara Anggota Organisasi Konferensi Islam (OKI). Kajian, 20(3), 255–270.

Puspita, C., & Agustina, N. (2019). Pola Konsumsi, Elastisitas Pendapatan, Serta Variabel – Variabel Sosial Ekonomi Yang Memengaruhi Pengeluaran Konsumsi Rumah Tangga.

Raju, S. (2024). Impact of imports from China on Indian manufacturing performance: an analysis of trade competitiveness. International Journal of Emerging Markets, 19(12), 4503–4525. https://doi.org/https://doi.org/10.1108/IJOEM-02-2022-0223

Rasbin, R. (2011). Gejala Deindustrialisasi Dan Dampaknya Terhadap Perekonomian Indonesia. Kajian, 16(2), 305–329.

Rinaldy, E., Ikhlas, D., & Utama, A. (2018). Perdagangan internasional: Konsep dan aplikasi. PT. Bumi Aksara.

Rodrik, D. (2015). Premature deindustrialization. In Journal of Economic Growth (Vol. 21, Issue 1). Springer Science+Business Media. https://doi.org/10.1007/s10887-015-9122-3

Rosadi, D. (2012). Ekonometrika & Analisis Runtun Waktu Terapan Dengan Eviews. CV. Andi Offset.

Rowthorn, R., & Ramaswamy, R. (1997). Deindustrialization—Its Causes and Implications (IMF Working Paper WP/97/42).

Schultz, T. (1964). Transforming Traditional Agriculture. Yale University Press.

Setiawan, & Kusrini, D. E. (2010). Ekonometrika. C.V. Andi.

Shafaeddin, M. (2005). Trade Liberalization and Economic Reform in Developing Countries: Structural Change or Deindustrialization? (UNCTAD/OSG/DP/2005/3).

Shigehisa, K. (2004). The Flying Geese Paradigm: A Critical Study of Its Application to East Asian Regional Development (169).

Sinaga, S. O., & Prasetyo, P. E. (2025). Pengaruh Pendapatan Perkapita, Nilai Tukar, Tarif Impor dan Investasi Terhadap Deindustrialisasi Prematur di Indonesia Tahun 1990-2023. Paradoks : Jurnal Ilmu Ekonomi, 8(3), 1269–1280.

Singh, A. (1977). UK Industry and The World Economy: A Case of Deindustrialization? Cambridge Journal of Economics, 1(2), 113–136.

Sinta, D. (2024). Transformasi Struktural: Faktor-Faktor Dan Pengaruhnya Terhadap Disparitas Pendapatan Di Kalimantan Timur Tahun 2012 – 2021. Universitas Islam Negeri Syarif Hidayatullah Jakarta.

Sobri, A. (2000). Ekonomi Internasional: Teori, Masalah, dan Kebijaksanaannya. BPFE UGM.

Squalli, J., & Wilson, K. (2006). A new approach to measuring trade openness (6(07); Economic & Policy Research Unit Working Paper).

Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.

Sujarweni, V. W. (2014). Spss untuk Penelitian. Pustaka Baru Press.

Sukirno, S. (2010). Makroekonomi: Teori Pengantar. PT Raja Grasindo.

Sulfiana, D., & Sentosa, S. U. (2021). Pengaruh Foreign Direct Investment, Inflasi dan Nilai Tukar Terhadap Kinerja Ekspor Manufaktur di Indonesia. Ecosains: Jurnal Ilmiah Ekonomi Dan Pembangunan, 10(2), 98–105.

Suliyanto. (2011). Ekonometrika Terapan Teori dan Aplikasi dengan SPSS. CV. Andi Offset.

Summers, G. (1984). Deindustrialization: Restructuring the Economy. The Annals of the American Academy, Political and Social Science, 9–14.

Supriyati. (2012). Metodologi Penelitian Komputerisasi Akuntansi. LABKAT PRESS UNIKOM.

Thirlwall, A. P. (1983). A Plain Man’s Guide to Kaldor’s Growth Laws. Journal of Post Keynesian Economics, 5(3), 345–358.

Timmer, B. C. P., & Akkus, S. (2008). The Structural Transformation as a Pathway out of Poverty : Analytics, Empirics and Politics (150).

Todaro, M. P., & Smith, S. C. (2006). Pembangunan Ekonomi. Erlangga.

Umer, F., & Alam, S. (2013). Effect of Openness to Trade and FDI on Industrial Sector Growth: A Case Study for Pakistan. The Romanian Economic Journal, 179–198.

Umoh, O. J., & Effiong, E. L. (2013). Trade Openness and Manufacturing Sector Performance in Nigeria. Margin: The Journal of Applied Economic Research, 7(2), 147–169.

Unegbu, P. I., & Ugwunna, O. T. (2024). Importation and Manufacturing Sector Performance in Nigeria: An Empirical Analysis. ANSU Journal of Arts and Social Sciences(ANSUJASS), 11(2), 43–60.

Utami, N. D., & Harchaoui, T. M. (2020). The Impact of China Shock on Deindustrialisation Over Time. Journal of Business and Economics Research (JBE), 1(2).

Verbeek, M. (2004). A Guide to Modern Econometrics (2nd Editio). John Wiley & Sons Ltd.

Widarjono, A. (2009). Ekonometrika: Pengantar dan aplikasi (Edisi Keti). EKONISIA.

Widodo, T., Setyastuti, R., & Adiningsih, S. (2018). “Flying Geese” Paradigm: Review,Analytical Tool, and Application (87171).

Winardi, D. S. Priyarsono, Hermanto Siregar, H. K. (2019). Peranan Kawasan Industri dalam Mengatasi Gejala Deindustrialisasi. Jurnal Ekonomi Dan Pembangunan Indonesia, 19, 84–95. https://doi.org/DOI: 10.21002/jepi.2019.05

Winarno, W. W. (2007). Analisis Ekonometrika dan Statistika dengan Eviews. UPP STIM YKPN.

Wong, S. A. (2009). Productivity and trade openness in Ecuador’s manufacturing industries. Journal of Business Research, 62(9), 868–875.

Wooldridge, J. M. (2018). Introductory Econometrics a Modern Approach (7th Editio). Cengage Learning.

Yanikkaya, H., Altun, A., & Tat, P. (2019). Openness and Deindustrialization: A Turkish Case. Bogazici Journal, Review of Social, Economic and Administrative Studies, 33(2), 1–25.

Downloads

Published

2025-08-02

Issue

Section

Articles